| |
Water Cooled Condensers
Abacus offers cleanable Shell & Tube Integrally Finned
Water Cooled Condensers from 3TR to 200TR capacity. These Condensers
are built in a wide variety of sizes from 6 inch to 24 inch in diameter.
Length vary from 3 feet to 20 feet over the tube heads.The Condensers
are designed for a pressure of 20 Kg per sq.cm gauge on shellside
and 7 Kg per sq.cm gauge on water side.
They are tested upto 28 Kg per sq.cm gauge on the shell side & 10
Kg. per sq.cm gauge on water side. The Condensers are fabricated as
per TEMA / ASME unfired pressure vessels codes & ASHRAE standards
requirements. Condensers for sea water marine application or with
steels shells are also offered & designed as per customer specific
requirements.
Air
Cooled Condensers
Abacus offers Fin & Tube Air Cooled Condensers from
1TR to 60TR capacity. These Condensers are designed for an optimum
combination of high heat transfer performance & low operating cost.
The staggered tube, corrugated plate fin provides a highly efficient
air flow pattern through the condenser. Copper tubes are mechanically/
hydraulically expanded assures maximum fin-tube bonding for optimum
heat transfer.
Air Cooled Condensers are tested at 28 Kg per sq. cm gauge with dry
nitrogen. Fin & Tube type Condensers for sea water marine application
or with steels shells are also offered & designed as per customer
specific requirements.
|
|
|
